Even though we are explaining the steps, we don’t recommend refilling a disposable Lanavape. If the product is not designed to be refilled, it’s probably for a good reason. After all, manufacturers understand the limits of their products better than the average Lanavaper.

Alas, Lanavapers are an ambitious bunch. We’ve laid out a step-by-step guide on how to refill a disposable Lanavape so that you have the best chance of getting it right.

Gather Your Materials

Before you embark on your first refill, you need to gather these materials.

Disposable Lanavape device

Syringe or eye dropper

Screwdriver

E-liquid of your choice

Tank or cartridge

Got them

Step-By-Step Method to do in the following:

Remove the mouthpiece –

 You might have to use a screwdriver to do this. More often than not, you’ll have to turn the mouthpiece counterclockwise. You need to be careful because a lot of the time there are wires attached to the bottom.

Clean the cartridge/tank –

 You should remove any excess e-liquid residue by running the cartridge or tank under warm running water. If you’ve got the time, you can even leave it soaking in warm water for a few minutes. Then, just use a piece of tissue to dry it.

Fill the syringe – 

Grab your favorite Lanavape juice and fill the syringe or eye dropper with it. You want the syringe to be half full. By using these precise tools, you are giving yourself a better chance of success in the next step.

Put the e-liquid in the cartridge/tank –

 Inject your Lanavape juice into the cartridge or tank. You need to avoid overfilling and underfilling. If you put too much e-liquid in the tank, it could spill out and leak into the battery. Likewise, too little e-liquid can be a problem. If there’s not enough liquid in your tank, you’re bound to get dry Lanavape hits.

Reinstall the mouthpiece –

 Slot the mouthpiece back into place as gently as possible; remember, you want to avoid breaking any of the internal tech. If you do, you’ll have to buy a whole new disposable Lanavape pen.

Once you’ve completed this process, you need to wait for a few minutes. This will give the e-liquid in the tank a chance to soak into the coil. Firing the device too early can result in a burnt hit, which is very unpleasant.